Solenoid Valve Air Compressor Valves 1089062100 1089062114

Solenoid valve

Solenoid valve belongs to the control system, there are loading solenoid valve and vent solenoid valve.
Solenoid valve in the compressor, mainly used to regulate the deviation of the medium, flow, rate, on and off and other parameters.
(1) Load solenoid valve
Load solenoid valve for two three usually closed solenoid valve, it under the PLC command to control the oil and gas barrel to the inlet valve to perform cylinder pipeline
Broken.
When the solenoid valve is charged, allow the compressed air in the oil and gas drum to enter the cylinder of the air inlet valve and open the air inlet.
When the loading solenoid valve loses power, cut off the oil and gas barrel to the air inlet valve cylinder channel, and vent the air storage in the cylinder, and close the air inlet.
(2) Vent solenoid valve
Vent solenoid valve is a two usually open solenoid valve, its size must be suitable for the inlet bypass valve size.
Emptying the electric valve
The size of inlet bypass valve and inlet bypass valve should be able to ensure that when the compressor is empty, the pressure in the oil and gas barrel is about 0.2MPa.
During compression unloading and shutdown, the vent solenoid valve loses power and releases the gas in the oil and gas tank to the inlet air filter.

Main products:

• Services Kits: Unloading Valve Kits, Unloader Valve Kit, MPV Kit, Stop Oil Valve Kit, Check Valve Kit, Thermostat Valve Kit and so on.

• Valve Assembly:Air Intake valve, Thermostat Valve, Solenoid Valve, Mminimum Pressure Valve, Blow Off Valve, Drain Valve and so on.

• Rubber Parts: Hose, Coupling, Elbow, Anti-Vibration Pad, Belt and so on.

• Sensor: Temperature Sensor, Pressure Sensor, Oil Level Sensor.

• Other Parts: Gear Set, Oil Seal, Shaft Sleeve, Spring, Controller, Oils and so on.

Qingdao Futai, Air Compressor Filter Manufacturer in China.