Hitachi Replacement 25605240 Screw Compressor Air Oil Separator
Analyze the characteristics of winding oil separator:
Compared with the folding oil separator, the winding oil separator
is tight between layers, the oil film between layers is thinner,
and the number of filter material layers is much more than that of
the folding oil separator, which belongs to deep filtration.
In general, the same model after winding type oil separator filter
material conversion accuracy is folding the oil separator filter
material of high precision, the gas discharge of oil amount is
lower than the same folding oil separator, because the separation
layer winding type oil separator is multilayer flat coil on the
skeleton, so flat around oil separator can withstand the pressure
from folding oil separator, winding type oil separator can meet
most of the application of air compressor.
The winding oil separator is also suitable for oil content
sensitive and high pressure machine and other fields.
| Hitachi Replacement 25605240 |
|---|
| Filtering precision | O. 1 Micron |
| 0il contained in compressed | below 3ppM |
| Filtration efficiency | 99. 99% |
| Service life | Approximately 4000h |
| Initial pressure differential | less than 0.02Mpa |
| Structure | The outer is metal nets, inside is high densite fiber glass and gas
separation material, most inside is the metal nets, flange
connection with sealing ring |
Oil Separator 25605240 is installed at the outlet of the air flow
to the main line and is used as a filter for returning oil to the
compressor circuit.
The industrial Hitachi 25605240 filter element replacement part is
made with high-quality materials and skilled craftsmanship.
This interchange for Hitachi 25605240 filter compressor replacement
meets or exceeds the specs and performance of the Hitachi OEM
filter element.
AIR OIL SEPARATOR — SEPARATES THE OIL FROM THE COMPRESSED AIR
