Replace Atlas Copco 1613800700 Screw Compressor Air Oil Separator
When excessive oil is fogged by compressor discharge, it may damage
pneumatic tools and accessories. To make matters worse, oil
emissions can adversely affect applications, sometimes even causing
projects to be scrapped and completely reworked.
Fortunately, this problem is often easy to identify and remedy, as
oily emissions often boil down to one of the following:
- Limiting air intake - Oil emissions are usually caused by limiting
the air intake of a compressor. In this case, the air filter will
either need to be cleaned or replaced.
- Piston ring expiration - As with oil spills, oil spills can result
from worn piston rings that need to be replaced regularly.
- Fill up the tank - If the compressor has too much oil, some of the
excess oil may seep into the effluent. The oil level needs to fall
to the "full" mark shown on the chart.
- Wrong oil viscosity - If the viscosity does not meet your
compressor's requirements, empty the tank and refill with a
different oil of the appropriate viscosity.
- Upside-down piston rings - Another possible cause of oil discharge
is upside-down piston rings, which may mean it is time to replace
the crankshaft.
If you use compressed air for painting, sanding, or surface
treatment, proper air treatment is necessary because you cannot let
the atomized oil into the air stream. Through preventive
maintenance, you will significantly reduce the risk of disruption
to the project due to interference with the paint job and the oil
particles in the paint finish.
| Oil Separator 1613800700 Application |
|---|
| BRAND | MODEL | MOTOR | PRESSURE |
| Chicago | S-16/100H,HH,L,M | 100 | 7/8,5/10/12 |
| Chicago | S-16/75H,HH,L,M | 75 | 7/8,5/10/12 |
| Atlas Copco | GA55 II GEN 551.001-551.999 | 75 | 7/8,5/10/12 |
| Atlas Copco | GA75 II GEN 751.001-751.999 | 100 | 7/8,5/10/12 |
| Atlas Copco | GA75 II GEN 771.001-771.999 | 100 | - |
| Atlas Copco | GA90 C II GEN 771.001-771.999 | 125 | 7/8,5/10/12 |
Features
- Low pressure drop and energy saving
- High quality filtration media
- Low oil consumption
- Reliable and stable
- Compact design
- Long life span
Notes for air oil separator:
- The air oil separator can only be replaced, not cleaned;
- Do not connect the filter with a flange.
- The oil return pipe must be inserted into the bottom of the filter
to avoid affecting the oil return.
AIR OIL SEPARATOR — SEPARATES THE OIL FROM THE COMPRESSED AIR
